|
Ok,by BIG I mean WTF!
I've yet to have a problem like this.My wipers would go up but wouldn't return,they'd just click.I replaced the wiper assembly.Wipers work fine,I had no reason to start the car till 2 days later,I start it,it turns over,hits on a couple cylinders then no start.I think since it started,maybe it was a fuel delivery problem and started off of residule pressure.Not the case,the relay works,the fuse is fine.I have a signal at the injector,I have spark at the coil,I have spark at the plug.Ok so I have fire and I have fuel,still no start,Gotta be timing right?Nope the cam lines up fine with the crank.I took it next door to a specialist and he's had it for a day and a 1/2 and as stumped as I am.Anyone have any suggestions?
My 1st thought is,it HAS to be something that was disturbed during the wiper assembly install.The only thing I can think of is the ground that goes from the valve cover to the firewall,I cleaned that well with sandpaper down to bare metal on both sides and it's tight.
Anyone ahve any suggestions?!?!?! PLEASE
Thanks in advance,
Justin
|