Volvo RWD Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 3/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PROBLEM SOLVED

posted by  CMR on  Thu Oct 16 09:12 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 25 10:55 CST 2010
[RELATED]

I had pulled the timing cover back and the belt was intact..However after seeing your post below I checked closer and found that the timing belt was stripped at the bottom pully and although it appeared to be OK it was not turning the cam...Since it uses the flywheel/crank trigger it was sending spark to the dizzy but the dizzy was stopped on terminal #1..So #1 was getting spark and 2,3 and 4 was not... Again...Thanks for pointing me in the correct direction..Brickboard rocks!!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need Help Really BAD!!!
posted by  CMR  on Thu Oct 16 05:22 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.