Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Checking Hall Sensor 1988

posted by  john sargent on  Sat Aug 2 07:15 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

That is exactly how I check them on the 740. Just make sure the coil wire is grounded (and not through you).

I use a 8mm ratcheting box end wrench to remove the three distributor cap screws, and a 10mm ratcheting box end wrench to remove the two bolts holding the distributor to the head. Those two wrenches make the job easy and worth the expense.
--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Checking Hall Sensor [1988]
posted by  rstarkie subscriber  on Sat Aug 2 05:34 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.