Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bougicords from fcpgroton 200 1989

posted by  greg_mustang on  Tue May 27 07:46 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 10 07:26 CST 2014
[RELATED]

Following my previous post...

Recap: I ordered Bougicords from fcpgroton. The wires did not have the metal sleeves (no big deal I guess), bit the lengths were not good. One long one, three equal length short ones. The two middle wires run high risk of touching the cam cover, too stretched. Yes I have the original spacers. My old Bosch set fits like a glove, all individual lengths, and has the metal sleeves.

I now received the second set (replacement) that fcpgroton was nice enough to send me. This set is the same as the previous, again three equal length wires and one longer one. Same poor fit. These ones don't even say Bougicord on them!

Anyone experienced this? Is Bougicord now having a jobber make their wires with poorer quality? I'd be surprised Bougicord makes wires without stamping their name on them.

Along all this though, Nick's service from fcpgroton has been good so far.

Any experiences to share?

Greg Mustang
Montreal - Ottawa
Canada





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bougicords from fcpgroton [200][1989]
posted by  greg_mustang  on Tue May 27 07:46 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.