Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2022 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Flex Disk Coupling Question 700 1985

posted by  Rolyak on  Sun May 4 02:26 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:03 CST 2014
[RELATED]

I replaced mine with one from FCP and was a perfect fit. Not sure, as it was several months ago but I thought it had sleeves in the bolt holes to limit the torque?

Just checked my Haynes and yes, it has torque limiters. It can installed incorrectly, the drive (trans) set of bolts need to be ahead of the driven (shaft)set in the direction of rotation on the thick part of the disc otherwise the torque is absorbed in the thin flex section.

Or the triangle piece is on the wrong set of bolts.

I had major vibrations from these two errors.

I'm betting you already have this figured out!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Flex Disk Coupling Question [700][1985]
posted by  aleekat  on Fri May 2 10:46 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.