Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help! DOT3 Brake Fluid 200 1986

posted by  iluvvolvos on  Thu Apr 24 11:02 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Help! My mechanic (good guy but not completely familiar w/ Volvos) just did a complete brake job on my old '86 240 (new master cylinder, front and rear rotors, new rear calipers, etc.). All parts used were good German-made OEM. Then in casually talking w/ him about the fluid he used, I learned he put in DOT3 instead of DOT4! I told him I had read on brickboard that the Girling front calipers and also MC seals react badly with the DOT3 and cause big time problems. What should I do now? The car has been driven for about 20 miles. Can the DOT3 be flushed out completely? How many flushes are required? Would a small amount remaining cause problems? Thanks for your advice. A very sad Fix It Mom






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help! DOT3 Brake Fluid [200][1986]
posted by  iluvvolvos  on Thu Apr 24 11:02 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.