Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replacing injector seals and control pressure reg. 200

posted by  someone claiming to be dlot on  Tue Apr 22 11:56 CST 2003 [RELATED]

The fuel pressure is regulated by a bolt with shims in the fuel distributor.
The control pressure regulator is also known as a warmup regulator. It's not
a fuel pressure regulator. It does perform a important fuel pressure function.
Anyway you can buy most CPR rebuilt for around $130. New ones are getting
expensive at $250-350. The injector seals are cheap. I recommend you use
vaseline to lube the injector seals. It makes them easier to put in. Be sure
to clean up the parts and the holes in the head with a good fuel injection
intake cleaner. Happy rolling.

Dave 82 242ti






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New replacing injector seals and control pressure reg. [200]
posted by  someone claiming to be bud760  on Tue Apr 22 06:49 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.