Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 10/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

instrument panel lights 200 1987

posted by  B.C. on  Mon Feb 17 07:49 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 28 22:28 CST 2012
[RELATED]

The illuminating lights are not related to the warning lights, thus one set can work with the others out.

All the illuminating lights go through fuse #16 and the rheostat up by the headlight switch.

The control panel lights are connected together, brown (BN) is hot side, black (SB) is ground. If you grounded a BN wire, and the fuse #16 is still good, there's a chance that the resistor in the rheostat blew.

Fuses can be sneaky. I have removed a fuse that looked OK, only to have the lead element come out in 2 pieces. Check there first, then the rheostat.

Good Luck,

Bob

:>)


PS If you intend to keep the car several years, the Volvo Service Manuals are a great resource. The wiring diagram books provide information not shown in Haunes, Bentley, or elsewhere. Mine is TP31076/1 www.volvocars.com/lit






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New instrument panel lights [200][1987]
posted by  nick_herron  on Mon Feb 17 06:50 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.