Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Strut Cartridge Replacement

Soak it several times with PB blaster and let it soak 20 mins between applications. Take a punch and hammer and whop the nut hard several times with each application. Then try to tighten the nut (sounds weird but often works) with your pipe wrench listening or feeling for a slight pop. If it does, it should back off. Also wire brush the threads well. If all fails, your last option might be a nut splitter or use a diamond or carbide bit in an air grinder to cut the nut in several places. Good luck!

bl.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Strut Cartridge Replacement
posted by  someone claiming to be Pat Levy  on Fri Dec 20 17:13 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.