Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Starts now

posted by  macbus on  Thu Nov 21 15:55 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi,

Remove the fuse and check the spades. If they are dull and fuzzy looking replace it, Look inside the fuse holer. There are two metal tab that connect to lugs on the wires. If they look nasty the holder should be replaced. If you handle it two much the whole thing will just fall apart. Get a new one from Volvo for about $6.00, You can also get a standard waterproof 30A holder from Radio Shack for a bucks. In a pinch you just plug the fuse into the lugs on the wire and tape it up carefully so that the lugs don't arc and bypass the fuse and that the fuse dose not get wet. Replace with holder when you can get a holder.

Chris
'83 245 with butt nasty wiring harness :)





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cleaned IAC now no start at all [200]
posted by  TURBODIABLO  on Wed Nov 20 21:07 CST 2002 >
  • New odds are......
    posted by  Kyle245 subscriber  on Thu Nov 21 08:14 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.