Help! I found a pair of ground wires that are unattached on the load side.

On the firewall, just to the driver's side of the engine, right behind the

intake manifold at about distributor shaft level, I found a pair of braided

aluminum ground wires (not main engine ground based on their smaller gage),

which are not attached to anything. They share a bolt on the firewall

itself. One wire is about a foot or so long, the other is much longer and is

currently laying across the passenger side of the tranny.

I am very unhappy about finding loose grounds, can anyone tell me where they

belong? The FAQ aren't specific on this and the Haynes manual doesn't even

get close.

Thanks for the help!!