Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 1/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Re: I broke the bleeder valve. Now what? 200 1988

posted by  someone claiming to be Tony H on  Mon Nov 27 06:28 CST 2000 [RELATED]

In the past I have been able to drill out the bleeder BUT not so much that it drills the calipers' threads. Drill as wide as you can without hitting the threads, then with a small screwdriver you might be able to pry whats left inward. by drilling it, you've made it so thin that it should crush in. I've done this on other household 'mistake' and I have been able to bail myself out.

good luck.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New I broke the bleeder valve. Now what? [200][1988]
posted by  someone claiming to be Kirk  on Mon Nov 27 03:46 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.