Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 12/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Re: Front tires vibrate at brake 200 1982

posted by  someone claiming to be Dave the Volvo Tech on  Tue Nov 21 16:55 CST 2000 [RELATED]

Larry-

To replace these bushings you need to remove the bucket (three 14mm hex bolts) and the 19mm nut on the rear of the control arm. I think you can do the job on jack stands, but the front suspension needs to be unloaded. Align the bucket level in relation to the control arm before tightening the 19mm so you don't preload the bushing and stress it during normal suspension travel.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front tires vibrate at brake [200][1982]
posted by  someone claiming to be Habib  on Tue Nov 14 11:52 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.