|
Josh --
Your fuel pump relay is mounted to the inside firewall, passemger's side, just above the fgelt kickpad. A tall pasenger's feet might kick it.
In a pinch, you can push into the solder cracks (assuming you have some and can see 'em with a magnifying glass) using a sharp object, such as an awl or thumb tack. This will deform the soft solder and "stake" the connections together. They may work again for a few hours ot few days.
Resoldering is best, even if the connections are now OK.
In the pix below, the fuel pump relay is on the left. (OD is on the right.)

Don Foster (near Cape Cod, MA)
|