Volvo RWD 700 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 10/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Absent Knock Sensor signal 700 1992

posted by  someone claiming to be abe crombie on  Fri Nov 10 15:54 CST 2000 [RELATED]

The terminals in the connector at sensor or in the harness between the sensor and the ignition ECU or even at the ignition ECU itself are likely the culprit. The knock sensor is a very low amperage signal and is very susceptible to any contact problems in any connections in that circuit. There may be a connector under the driver's strut tower-to-firewall brace that could have the wires for knocking sensor passing through it.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Absent Knock Sensor signal [700][1992]
posted by  someone claiming to be Gilles Lajoie  on Fri Nov 10 08:13 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.