Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2014 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hitch for my 940 900

Hi Dave,

You will remember our conversation regarding the traile hitch and its connections.

Today I tried to connect the powered converter below:

https://www.curtmfg.com/part/59496

Then I started the testing with a 12 V bulb while doing the connections.

Everything seems to work:

Left and right turns
Taillights

But I cannot get the stop lights to work, I push my brake on, but the 12V bulb does not light up.

The converter red wire is connected to the PIN #6.(Yellow/brown)

It must be something very stupid I am doing, but no idea what :(

Your help is appreciated.

Thank you!
Alex

P.S.: It was something stupid indeed: me. I was testing using the tailgate connector, while changing the connector to either the left or right turn, the brake light works. This means that the purpose of the converter is to send an individual brake light signal (yellow/brow pin 6)to both turn lights using the red wire.

Sorry to have bothered you Dave.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Hitch for my 940 [900]
posted by  Metallo  on Sun Feb 25 12:19 CST 2024 >
  • New NMI [900]
    posted by  Dave Stevens  on Sun Feb 25 15:27 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.