Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2007

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wiring a 'prime' button to the EFI relay without nuking the ECU

Hi Kitty,


He can jump 12v direct to the pumps and forget the main fuel relay and messing with the ECU

>Sort of a similar thing thatg some do to use the rear red fog light position as >an esxtra brake light, yet preserves the fog light function? I forget now. Sorry.

I just replaced a busted tail light in my wagon, and thought who needs fog lights?

Maybe modify the foglight switch to be active with the ignition on (instead of the low beams on) and use the fogs as DRL without all the low beam baggage.
For the rear, Unplug the upper fog wire and run a wire from top to bottom
brake lights and have twin brake lights.
This works with the low current Red LED's. Way more light and way less current.
Yes you use red LED to shine through a red lens. Yellow LED through a yellow lens, etc.

Has anyone been able to salvage sections from Volvo taillights that look like
they are cemented together with PVC cement ? Maybe there's a trick to getting them apart? Heat gun?

Easy does it with that eggnog, especially the high octane variety!

Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Wiring a 'prime' button to the EFI relay without nuking the ECU
posted by  Will740turbo subscriber  on Thu Dec 21 21:13 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.