Quantcast
RWD - 1991 940 idle issue

Volvo RWD Forum

INDEX FOR 9/2019(CURRENT) INDEX FOR 6/2017 [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE   A    A 

1991 940 idle issue

My 940 (945 wagon) is a UK spec car with a B200F engine - 2 litres, non turbo.

I've got a minor issue with the idle speed. Normally starts and idles at around 750 rpm, very stable. After a run along a motorway at 70 mph or so, the idle settles back to around 1100 rpm. However if I switch off and switch back on again immediately, the idle is back down where it should be at around 750 rpm. So it seems that a high speed run is making some change to the engine which can be immediately cancelled by a re-start?

I have cleaned the throttle body and the idle air control valve, and checked that there are no air leaks in the induction system.

Any ideas please? Not sure whether it is inconsequential or an indication of something which I should be dealing with?

Many thanks

OwenF
Scotland






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1991 940 idle issue
posted by  OwenF  on Wed Jan 23 06:29 CST 2019 >

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts