Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

K jet mixture adjust using dwell etc 200

posted by  abracadabra on  Tue Jun 26 17:26 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Still can't find the blue/white wire mentioned in #6 for procedure.
Looking at my diagram in the Green book it shows wire 12, from control unit in passenger comp, ending at the coil. They say to remove wire for 1st idle setting, then adding it.
Maybe I don't have the blue/white test point in the engine comp.
But I still can' figure out how to remove the wire from the black plastic connector thingy, the book says nothing about it, and when I do google searches I must be using the wrong terminology.
Anyone tell me how to get a wire out of the plastic multi connector that plugs in the the control unit?

Abra






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New K jet mixture adjust using dwell etc [200]
posted by  abracadabra  on Fri Jun 22 11:06 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.