Quantcast
RWD - Hard start after oil cahnge

Volvo RWD Forum

INDEX FOR 12/2017(CURRENT) INDEX FOR 1/2008 [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE   A    A 

Hard start after oil cahnge

So here's what occurd while changing the oil in my 1991 240. While I was getting the oil wrench attached to the back of the oil filter it slipped and touched the back of the altenator. A small spark and it feel down below the car. Of course I felt stupid for not disconnecting the battery first. But now when the car has sat overnight it will not fire until I turn off the key and then try for a restart. Then it will fire right up. Have I shorted out some part of the fuel system? I will double ck the fuse's but could I have done something to the pre pump?
Relay? Other?
Judd

 





[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Hard start after oil cahnge
posted by  jwheli  on Thu Sep 14 06:53 CST 2017 >

[about brickboard ads]

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts