Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

buggered spark plug threads #1& #3 200 1992

My daughter's 92 240 Verde almost 200,000 miles on the clock..
Time for engine seals, belts and stuff...
All was well till i went to put in the spark plugs...
Two years ago I had run in with #1 plug (it would thread but not tighten) so I bought a LISLE spark thread repair kit, and every thing was good...
The #1 plug was a little stiff coming out, but it always has been.
Long story short,,, apparently the new threads stayed on the plug and I threw the plugs out not really looking at the plugs.. SO I go to run the plugs in and the head says "NO I don't think so"
I tried to chase the threads and reinstall a new thread insert...
well again no dice
So no what do i do?
I have a really nice head and installed cam from a 92 240 turbo in the garage, and most everything to do a head swap , Should it come to that
Any bright ideas?
The new oil seal presses worked really well,little silicone grease on the friction surfaces and wham-bam, went on pretty much with finger effort..
I'm getting to old for this

Paul out between Disneyland an downtown LA






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New buggered spark plug threads #1& #3 [200][1992]
posted by  BonesandFeathers subscriber  on Sat Apr 30 17:21 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.