Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ABS light on Speedometer does not function... 200 1992

1. remove the axle speed sensor connector
2. remove cluster with - battery terminal OFF FIRST
3. disconnect the L connector at back of cluster

get some long wires to use with your voltmeter

4. test continuity between green/white on L connector and speed sensor connector
5. same for black wire

if you have continuity the problem is in the cluster or speedo

make sure the red/white tack white has not been inadvertantly connected tot he cluster sans tach. if it has you have cooked your speedo and will to replace it and maybe even your cluster board

as for the abs. you likely have metal detritus attached to the abs sensor magnet in the wheel hub which now needs a good wipe






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ABS light on Speedometer does not function... [200][1992]
posted by  TheBrickTank  on Mon Sep 28 09:40 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.