Volvo RWD 120-130 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 2/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

time for a valve job ? 120-130 1967

posted by  derek uk on  Sun Oct 26 05:20 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:33 CST 2014
[RELATED]

Did you do that test with the engine fully warned up? A said, the numbers are very good especially if done all plugs out and fully open throttles. If you've never done the valve clearances on this engine you won't know, but the small reduction in the exhaust valve clearances could indicate that the seats are starting to recede a bit. Set the clearances to perfection and then recheck them after 5k miles to see if there are any changes. Are you using lead additive?
Numbers that high should also indicate that your oil consumption is virtually nil between changes. Correct?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New time for a valve job ? [120-130][1967]
posted by  riverbend subscriber  on Sat Oct 25 07:06 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.