Volvo RWD 900 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 4/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

940 No start after timing belt change 900 1993

posted by  Hack8 on  Tue Sep 23 13:05 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 23 14:00 CST 2014
[RELATED]

Thanks Gentleman,

I’m unable to test the spark. The rotor and plugs were not disconnected during timing belt replacement.

I’ll try the fuel test when my wife gets home.

There is no firing at all. Just the timing belt spinning as I turn the key to start.

MrNabisco I think your right, I disturbed an electrical connection. I’m having a hard time finding it so I’m checking all the wires I see.

I can here the fuel pump turning on.

Trichard, I reset the crank on the timing cover and the rotor was pointing at spark plug wire one. Also the crank, cam and rotor are all correct in their orientation.

Not sure where to look.

Hack





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 940 No start after timing belt change [900][1993]
posted by  Hack8  on Tue Sep 23 11:33 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.