Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2009 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Dropping the Ball... 120-130 1967

uid 4433's pic
posted by  patrick of montreal on  Sat Aug 30 09:27 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 08:25 CST 2014
[RELATED]

probably something else ....26k on a ball joint is nothing...UNLESS you did not grease them during the install! Some ball joints tie rod ends etc come dry in the box and need to be greased before installing and if you are in a rush or using a grease monkey of no repute they can be installed dry....steering box and idler arm will also knock if worn/loose and the steering box likes to work it's big attachment bolts loose in the "frame" by bending the frame walls.
--
Patrick, '68 220 , '53 GMC 4104, '97 VW Transporter.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Dropping the Ball... [120-130][1967]
posted by  Pooch  on Fri Aug 29 10:59 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.