Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

j type overdrive 1970

posted by  volvosteve on  Fri May 23 11:12 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 23 11:12 CST 2014
[RELATED]

I have a J type overdrive to put into my 64 PV544. During assembly I have lost two of the spacers on the layshaft. I have traced the part number to be 380809 which is no longer available, of course. Does any one have two lying around or know where I can source them?
they are the ones which go with the set of 21 needle bearings on each end of the shaft.
the od is 0.908 or 23.06 mm
the id is 0.725 or 18.442 mm
thickness is .0535 or 1.36 mm

I have had this tranny for a while and now I get around to it I have lost 2 of the parts and converted it to a fine looking door stop. Any help would be appreciated.

Steve






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New j type overdrive [1970]
posted by  volvosteve  on Fri May 23 11:12 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.