Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2023 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Shifter linkage bushing install trick 900

posted by  Chris Mullet on  Thu Feb 20 09:27 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:08 CST 2014
[RELATED]

"...I realize there's little work room...."

Amen to that!

With my big fat hands I found it worth the time and effort to support the Trans with a floor jack (2x4 between the jack and trans pan), remove the cross brace, and then lower the trans a couple inches - not too much as you don't want to be yanking any wiring, heater hoses, etc. That made the bushings a bit more accessible, especially the upper-most ones.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Shifter linkage bushing install trick [900]
posted by  yankee subscriber  on Wed Feb 19 22:20 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.