Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No power at fuse 6? 200 1993

posted by  lucid on  Mon Nov 18 07:18 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

"-checked fuses 4 & 6. Fuse 4 shows power when first keyed on, no power at fuse 6"

On '92/3 240s, Fuse 6 is the primary power source for the Fuel and Ignition systems.

According to Volvo diagram in Bentley, fuse 6 should always have direct battery power by way of a connection box on left front inner fender. Look for the black plastic box with one larger (Red) wire coming in from battery +, and 4 smaller wires coming from common buss via push-on connectors - one of which goes straight to fuse 6, a guaranteed No-Start.

Disconnect the battery negative, then exercise all of the "push-on" connectors to remove possible corrosion. The power to fuse 6 appears to be carried by one of two Orange wires.


--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New can't get 240 started [200]
posted by  Seitanist  on Sun Nov 17 19:25 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.