Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2020 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

EGR Temp Sensor code 4-1-3 900 1994

posted by  Volvo945 on  Sat Aug 10 17:27 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 12 15:05 CST 2013
[RELATED]

Great timing on your reply! I'm just in from the garage to diagnose the issue.

The sensor wire was either pinched or just rubbing against the mounting bracket for what I think is the starter solenoid. The insulation was rubbed clear thru and the wire almost severed. I'm thinking it was shorting out so no signal to the ECU. I did not have a new sensor so I did a simple electrical tape wrap job on it. I'll order a new sensor if the light comes back on. Can't explain how the sensor wire came to be in that position as I've never done any repairs in that region in the 14 years I've had this car.

And no smog test in my state (MO) for car of this age, so one less thing to worry about.
--
'94 945t; '94 944t; '05 S80 2.5t; '01 S40t






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New EGR Temp Sensor code 4-1-3 [900][1994]
posted by  Volvo945  on Wed Aug 7 21:31 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.