I've got a clutch fork that is starting to go.
I am aware that this is a weak link and changed from a '68 140 series clutch fork to a '72 140 series clutch fork a few years ago. I seem to recall that the '72 was somewhat reinforced compared to the '70. But after all these years, I cant remember how.

Anyway, I've still got the '68 fork that I removed and is cracked. I can have a friend weld it back together - maybe even put some extra support in there.
But I want to be sure to make it as close to original as possible. There is a bend at the end where the cable connects. The crack is closer to the opening for the throw out bearing. I'm not sure if that bend at the end of the arm is actually supposed to be there.

Here is mine...



If it is easier to PM me to exchange photos, that's fine with me.
Thanks.
--
"Differences of opinions should be tolerated, but not if they're too different" - Sharon Craig