Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Power window 700

posted by  benton33 on  Mon Jul 23 20:34 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jun 27 20:53 CST 2013
[RELATED]

Hi,

I have the 1988 740 turbo wagon with power windows. All power windows work but the front passenger side, neither drivers or passengers side switch will roll the window down. Luckily the window is fully up.

With key to II position I get 12 volts at pin #4 of the front passengers side window switch connector. Then with key in II position I get around 2.6 volts, at pin #5, when pressing the switch in one direction (cant remember which) and the other direction gets 0 volts. This is some test out of my manual or maybe the faq.

Also, while using either driver or passenger switch I can hear the window motor actuate while pressing the switch in the direction to roll the window up. When I press down no sound is heard from the motor.

Anyone have an idea of what the problem could be? Or any additional tests to find the culprit. I have a/c so I'm in no hurry .

Any help is always appreciated,

Benton





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Power window [700]
posted by  benton33  on Mon Jul 23 20:34 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.