Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Carb. problem? 140-160 1972

So, in playing with my carb. to eliminate a slightly rough idle looks like I may have created a problem I can't figure out.
After setting valves,points, timing and adjusting the carb idle for highest RPM/vacuum it has a funny problem. When I start it(warm) it idles at 800 just fine but when I rev it the rpm's won't drop below 1200 no matter what I do. However, if I put the car in gear (auto trans) the rpm's drop to normal and everything is fine, put it back in park and everything is still OK. As soon as i rev it though, back to 1200 or so. Not sure what to check, not to familiar with these carbs as I just got the car. Doesn't seem like it would be a vacuum leak but something is getting stuck. If anyone has any Ideas as to what to look at I'd appreciate it.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Carb. problem? [140-160][1972]
posted by  72142s  on Mon Oct 3 07:27 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.