Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Problem Solved!!!!!! 200 1992

Thanks so much guys. Especially Art and JWalker and whoever else was helping me out. You guys rock!!!

It was a combination of problems.

The main problem.

Spark plug #3 was bad. The ceramic stuff around the tip inside the engine was half gone. This was the cause of the misfire, lack of power, and I guess the gas smell coming from the exhaust.

The minor problem.

Several of the intake manifold bolts were pretty loose. So I tightened them up.

All is good with the world again with steady idle with no engine shake.

I'm tired. Hopefully I can go fishing this weekend instead of working on the car.

Tom






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Poor Idle, Engine Shake....Revisited [200][1992]
posted by  Dan Marino  on Wed Apr 27 05:52 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.