Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2009 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replace wire harness 1800 1968

posted by  planetman on  Sun Mar 27 21:33 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Hello,

We replaced the engine harness with a reproduction in a 1962 P1800, which includes most of the dash wiring.

It was not that bad.

But we are very familiar with the wiring and in fact had to modify the harness to accept a Bosch alternator and regulator.

FYI, if you are using a stock style alternator, or if you are planning on it, I believe you can use the wiring harness for the 1969 which came with an alternator.

New reproduction harness' for both the 1968 and the 1969 are available.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replace wire harness [1800][1968]
posted by  4th1800  on Sun Mar 27 16:44 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.