Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2022 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rough running 1990 244 200

posted by  dmcgee on  Sat Jan 29 15:25 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 30 01:40 CST 2013
[RELATED]

I've got a 1990 244 that runs real rough. It is only driveable when the AMM is unplugged. I've tried three different AMM and have the same results. It wants to die at idle, so I removed and cleaned the intake (it was pretty crapped up)and also cleaned the IAC valve. I tested the IAC by giving it 12v's, it works. I then tested the plug with my DVM. I read 11.88v with no pedal, it read the same with the pedal pressed. It's my understanding that when the pedal is pressed that the 12v should stop. Right? I'm kinda stumped, I think I've got two seperate problems. What are my next steps?

Stumped in Ohio






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rough running 1990 244 [200]
posted by  dmcgee  on Sat Jan 29 15:25 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.