Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Highbeams don't work 200 1990

posted by  dinomartino on  Wed Jan 26 07:03 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:43 CST 2014
[RELATED]

Okay, then I would start with cleaning and re-seating the red high-beam wires where they connect to the step relay. If no joy then, clean and re-seat the connectors where they clip onto the back of the bulbs. If still nothing, I'd check the red wires for continuity b/w relay contact and bulb contact, and confirm something hasn't cut them somewhere. And at that point, I'd start to wonder if there isn't a bad solder joint inside the relay where the prongs for the headlights meet the prong for the warning light.

John

--
1989 245 233K / 1993 945 127K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Highbeams don't work [200][1990]
posted by  Marlin Mangels subscriber  on Tue Jan 25 17:24 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.