Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2015 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

220 engine replacement 120-130

posted by  walrus3 on  Mon Dec 13 07:49 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

Kent!
There is one more picture that Gary didn't include - the 74/75 B20F head doesn't have ANY
dips in that location. It is really good (according to the experts) for porting and
can also be milled for higher comp.
I would not recommend milling more than 0.060- 0.080". I ran into a pushrod length problem
on the YP and ended up having to shim the rocker stands because of that.
Seems to be working OK but an undesirable fix. Alternative would have been different
lifters or custom pushrods. I chose the cheap way out. (being Scottish)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 220 engine replacement [120-130]
posted by  rkent47 subscriber  on Thu Dec 9 07:50 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.