Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Questions regarding Converting a 1990 240 wagon to R134a 200 1990

posted by  gopeshs on  Tue Jun 29 16:02 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 19 14:01 CST 2014
[RELATED]

Thanks for the tips. I was little worried about sight glass not present in the drier.o rings is really an issue, except the kit there are not many options available. Today I opened expansion valve which was covered thoroughly in butyl tape, which I think is wrong, the service manual esp says "Do not insulate the expansion valve" .The valve was clean and brake cleaner passed to and fro without any issue so am not replacing the expansion valve. I will take car to some mechanic to draw vacuum.Thanks again.

Regards,
--
DD-1990 240 DL SW M47II FI 3.1 234 K miles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Questions regarding Converting a 1990 240 wagon to R134a [200][1990]
posted by  gopeshs  on Tue Jun 22 04:39 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.