Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No prop shaking at speed 120-130 1967

posted by  derek uk on  Wed May 26 11:11 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:33 CST 2014
[RELATED]

If the front yoke of the front section, GB end, is parallel to the ground the yoke on the sliding section should be identical. This will mean the rear yoke of the rear section is vertical. If you jack the rear axle up and undo the prop shaft, you can slide it out and repositio it. Should be even smoother then.
Pics in Haynes are the same as the Green Books.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Prop shaft question [120-130][1967]
posted by  KlausC subscriber  on Wed May 26 06:27 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.