Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

throttle position switch functionality 200 1993

posted by  ronald on  Wed Dec 9 03:49 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 10 11:04 CST 2012
[RELATED]

So the IAC becomes active when the TPS says the throttle is closed and the IAC opens to increase idle and closes to decrease idle depending on the feedback from the CPS? The o2 sensor sees this increase or decrease in air flow as a rich or lean and the ecu compensates by increasing or decreasing the idle preset injector on-times. Then as soon as the CPS indicates the throttle is open, the IAC closes and air flow is measured by the AMM, injector on-time is calculated and again compensated by the o2 sensor output.

Am I getting it?

Ron






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New throttle position switch functionality [200][1993]
posted by  ronald subscriber  on Wed Dec 9 01:43 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.