Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2010 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

First Start. 120-130

posted by  volvorelix on  Thu Oct 8 11:30 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 21:56 CST 2014
[RELATED]

I strongly agree with Derek.

If the cam and lifters are new, turning the engine over with only the starter (or by hand, or by some other means) will cause more harm than good.

If you want to push oil through the galleys before starting the engine, spin the oil pump until oil comes out around the rocker assembly. ipd used to sell a fancy tool for this, but a long screwdriver works just as well - you're not trying to build pressure, just getting the oil everywhere it has to go.

Set it up so that the engine starts as promptly as possible, keep the revs up (I like to vary between 2500 and 3000), and DON'T let it idle for the first half hour of its new life. Don't shut it down unless you really have to.

Best,

Cameron
444,122SC
Rose City






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New First Start. [120-130]
posted by  benwah  on Thu Oct 8 07:28 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.