Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

diagnostics for cruise control computer and vaccum unit 200 1989

posted by  lrisius on  Tue Sep 15 14:10 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 17 05:59 CST 2014
[RELATED]

Hi,
I've got an 89 240 with a cruise control that occasionally works- most of the time it doesn't. I think I've done the basic diagnostics. I've checked vaccum hoses, I've pulled a vaccum on the hose at the controller in the engine bay and the servo functions. I've checked the wiring and switches at the turn signal switch, brake pedals, etc. Basically everything I can get at.

I don't know how to test the computer and the unit that controls the vaccum. This is the older model that has a reservoir that connects to engine vaccum. IIRC there are 3-4 wires connecting the computer to the vaccum unit. Does anyone know what the voltages should be between these? Is there a way to jumper power to the vaccum unit and test it?
Thanks in advance!
Lyle






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New diagnostics for cruise control computer and vaccum unit [200][1989]
posted by  lrisius  on Tue Sep 15 14:10 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.