Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2001

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

144 Error Code on 940T; Bad ECU?

posted by  BigMile940T on  Sun Aug 30 05:21 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 5 20:51 CST 2010
[RELATED]

My 940 has been running great lately, except for stalling last night. This 940 has the Bosch/LH, not a Regina car. It stopped running suddenly and is now posting a 144 code on port 6, showing a "No load signal from fuel injection system" issue. It also had a 121 from port 2, but that code isn't showing up after checking the MAF plug.

After reading the posts concerning this 144 code I decided to look into it myself. I've investigated about this code and ran some diagnostics based on what the posts told me. The posts said that typically this code is tripped from a lack of power coming from the 87/1 spade on the injector relay. I replaced the injector relay with a known good one, checked the voltage at the fuse panel and followed the power to the ECU.

I thought I had a spare ECU, but can't locate it. I'm going to take a look around the local junkyards for a compatible ECU.

In the meantime, does anyone have any other ideas of what could be wrong? At this point I'm somewhat stumped and could use some help.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 144 Error Code on 940T; Bad ECU?
posted by  BigMile940T  on Sun Aug 30 05:21 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.