Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Filler Neck Replacement or Repair 200 1988

posted by  Robert S. on  Mon May 25 07:25 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 21 05:48 CST 2014
[RELATED]

A new CA emissions functionality test caused our '88 240 DL wagon to Fail. The filler neck mouth over the years has become slightly out-of-round because of countless gas nozzle insertion and because of no/little vacuum seal, will not pass this part of emissions test.

Question: Can the filler neck be replaced separately, or does the entire gas tank need to be replaced? I don't know if the filler neck bolts on, or is integral to the tank with a pressed or soldered fit.

The seal at the filler neck mouth will need to be restored for the car to pass emissions.

Thanks, Robert





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Filler Neck Replacement or Repair [200][1988]
posted by  Robert S. subscriber  on Mon May 25 07:25 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.