Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

bolts on clutch P/P seized Help

posted by  planetman on  Sun Sep 14 14:02 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Hello,

If the heads are stripped you will need some sort of extactor.

A company called Irwin makes a set of extractor sockets called Bolt-grip. You can hammer the correct sized socket onto the bolt head and then use a socket wrench to remove them. These even work on allen head bolts.

You might have to buy the suppliment kit to get the correct size.

Kragen Auto Parts carries the starter kit with a storage box under part number 394001. This kit contains Bolt-Grip sockets that are for standard and some metric sized bolts. The suppliment kit is part number 394002 and fills in the missing sizes.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90501






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New bolts on clutch P/P seized Help
posted by  alminator  on Sun Sep 14 10:56 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.