Hello. I have a very nice 'F' head available for sale. The head has been shaved down to 'E' head height. The exhaust ports were recently (a month ago) ported by Vintage Performance Developments to flow easily as much as and probably more than an 'E' head. Valve stem-to-guide clearances were checked and showed to be in fine spec. The valves were three-angle cut a few years ago, then the head was used for maybe a thousand miles, so the valve job is recent. Valve springs are very lightly used performance-type single springs that were recently checked and found to be ready for long-term stock or performance use. Valve stem seals are brand new. The head has not been refinished so it is not shiney red, but it is not gooey with oil and dirty or anything. It is dry and ready for paint. I don't have pictures at the moment, but the head looks very much like any other B20 injected head that you may have seen on this site. The head recently left the main man's posession up at Vintage Performance Developments and he stated in an e-mail to me a few weeks ago that it 'is a very nice head'. I have spent around $500 in the past three months on this head. It is available for sale now for $300 plus shipping.

I also have a very nice, ready to bolt externals to, B20 short block available for sale. No head. Very nice, tight, balanced, internals and fresh high quality red engine paint. It is an awesome starting point for a very nice engine build. $500

I also have a '65 wagon being auctioned on the online auction site - auction number 200242679423, ends August 5.

Contact me through Brickboard messaging if interested.

Serious inquiries only, please.

Thanks.

Deluxe