Volvo RWD S90-V90 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2006 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

tips for changing rear dust shields, please S90-V90 1998

posted by  bluedot on  Sat May 17 07:32 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Nov 15 07:05 CST 2010
[RELATED]

I attempted this job on my 97 964 and foond that the driveshaft,wheel bearings and spindle would likely need to be removed to change the rusted out pie pans.In the early stages of this tear down,I found all three brake cables and all of the parking brake components were rusted to junk.Faced with buying a fortune in parts and many hours of under-the -car labor,I lost my desire for parking brakes.I also felt the wheel bearings would not survive tear-down and re-assembly.Nothing else on this car was rusted.I did sell it.
Good luck,Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New tips for changing rear dust shields, please [S90-V90][1998]
posted by  jharinko  on Tue May 13 18:29 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.