Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Has anyone here used a Scantech control arm from FCP? 200 1989

posted by  someone claiming to be adk blues on  Mon Mar 31 14:00 CST 2008 [RELATED]

I bought two of them for my wife's '90 sedan- pressed in new control arm bushings. This was before I realized it was really not that hard to press OUT the front control arm bushing (in the arm) with my 12 ton shop press. I still have them in the shop- did not put them on the car. While they don't seem to be made quite as well as the original Volvo arms, they are probably OK for normal driving.

Heck, if you're near the Albany, NY area, I'd probably be willing to part with them for like $100 each with a new Meyle control arm bushing installed.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Has anyone here used a Scantech control arm from FCP? [200][1989]
posted by  245DogWaggin  on Mon Mar 31 13:22 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.