Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2020

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

84 240 Turbo Broken Stud=fixed Will not start now

posted by  cx on  Thu Mar 6 11:56 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 07:56 CST 2014
[RELATED]

Hi Chad,
Sorry took so long to get back.... just got in from work and going back out again very soon. The best way to replace wires is to remove 1 wire at a time and then replace it. Much less chance of mucking up the firing order when done 1 by 1. Post back if you think this could be your problem.... I have an '82T all covered up outside that i could get at over the weekend (after our next 2-3" of rain). I think you said somewhere that you have a Bently manual.... if so I'm sure you could find the firing order in there or I can dig out mine and fax or email if you need it. Let me know.




cx

p.s. you did put the rotor in under the new distributor cap and made sure it is in it's keyed slot right? I only ask because I have done this in the past






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 84 240 Turbo Broken Stud=fixed Will not start now
posted by  Roadside Mechanic  on Thu Feb 28 09:24 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.