Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2001 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

adding a different ignition 1800

It's fairly straightforward. Get an after market switch & coil. Disconnect the original; block off the hole from the old coil. Run a wire from the ign. switch to the ballast resister,then to the plus side of the coil. Minus side of the coil goes to the dist. You can get creative & wire the radio to the acc. side of the ign. switch but that's optional.

Mike M.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New adding a different ignition [1800]
posted by  livelarg  on Sat Nov 3 17:45 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.